EASYJOINT Paving COMP Black 12.5K

Product Information

This is the most popular colour option within the EASYJoint range. It goes well with light and dark paving slabs and is suitable for almost any project Joint-IT Neutral - Alternative: Wet the Paving. Thoroughly soak the patio or paved area to be jointed with lots of water using a hose. The paving must be absolutely saturated before starting and remain soaked throughout the application process ‘the wetter, the better.’ We strongly recommend not shortcutting this process, particularly when working with absorbent or sensitive materials such as Sandstone, Granite and Limestone. Highly absorbent and porous stone will require sealing, 2-3 days prior to laying, on its top surface and four edges. Top Up Low Spots. Use more EASY Joint to top up any low spots in your joints, repeating the washing process as described previously. EASYJoint is perfect for patios, paving and paths that only have pedestrian foot traffic, however will not withstand the weight of a car or larger van. We do not recommend EASYJoint for use on driveways due to the types of sub-base and bedding mortar needed. Should I seal my paving slabs before using EASYJoint brush-in patio grout? Ideal for use with natural stone, limestone, porcelain, Yorkstone, Indian Stone, granite setts and concrete paving slabs

Heavy Traffic Pro Jointing Mortar - 2-Part Epoxy Resin Mortar System - suitable for vehicle areas up to 7.5 tonnes If heavy or prolonged rain is forecast, it is ideal to wait for drier conditions as heavy rain may disturb sand particles in the EASYJoint mix before it cures solid, giving an uneven texture. Prolonged rain will also extend the curing process. Any dates specified by Building & DIY Supplies for delivery of the Goods are intended to be an estimate and time for delivery shall not be made of the essence by notice. If no dates are so specified, delivery shall be within a reasonable time. To further aid this, "point" or "strike" the joint; do not leave it textured. This ensures the top of the filler is below the top rounded edge of the paving and helps it adhere to the base and sides of the paving material. Less Effort: The wash and sweep in application method makes it easy to use and jointing paving is faster than traditional methodsThe two market leaders are EASYJoint and Joint-IT, so lets look at both of these and see which one comes out on top. EASYJoint Some concrete paving is made in moulds and has chamfered edges creating a 'V' shaped joint between two paving slabs, wider at the top than at the bottom. This gap shape can be the most challenging to work with and we recommend you carefully follow the instructions below. In dry conditions and warm temperatures and humidity, EASYJoint should be firm enough to walk on within 24 hours and will cure hard within a few days.

Do not use a pressure washer on the paving for at least 4 weeks after EASY Joint’s application. Always use a fan type nozzle at a 45 degree angle and no closer than 15 cms / 6 inches to avoid removing the jointing material from between your slabs. Is EASYJoint suitable for patios and driveways? Using small quantities of EASYJoint, simultaneously spread and wash the compound across the surface using a light jet of water and a broom/squeegee, allowing it to fall into the jointsA single 12.5Kg Tub of EASYJoint will cover approximately the following areas of paving* Paving Size (mm) EASYJoint offers all-year-round use. It can be applied any time in the wet warm or freezing cold. It is up to 20 times faster to use than traditional mortar jointing products and there is no need to bend over or be on your hands and knees to trowel it in. The EASYJoint product is extremely strong and offers long-lasting joints for years to come. When used correctly there will be no staining on patio slabs as the products comes away completely cleanly. In wet weather conditions, the curing process will be suspended. Prolonged periods of rain, or several intermittent showers will considerably extend the setting times. Again, this will not affect the final integrity of the product in any way provided water can drain easily away and so allow even curing throughout the joints (as previously explained).

Smooth the joints: when drained and dried, lightly "point" or "strike" the joints with a suitable finishing tool Frequently asked questions before using EASYJoint brush-in patio grout! Does EASYJoint brush-in patio grout need a permeable sub-base? Both the bedding and sub-base must be permeable. When using a mortar bedding mix, this should be no stronger than 6:1 (sharp sand: cement). Be careful when using add-mixtures such as SBR or PVA as these can seriously affect the permeability of a mortar mix.

Step 7. Pour

The result of using EASYJoint, to joint your paving, will be a paving gap that is completely filled without the need for kneeling and compressing the material by hand that will last for years. A strong joint that will resist the elements and stand the test of time – better than traditional jointing Zero Waste – Opened tubs of EASYJoint, if not fully used, can be kept for later use providing they are covered by a minimum of 2″ (50mm) or more of water As with EasyJoint Original, EasyJoint Select uses a sweep-in application instead of traditional methods, making it easier to use and faster to apply. EASYJoint can be installed dry, however to use this method the paving must be sealed at least 2 - 3 days before the EASYJoint application. The paving slabs must be sealed on five sides (the top and four edges). When applying dry, EASYJoint compound must be compressed, by striking off with a pointing tool into the joints as it will not self-compact in the same way it does when applied with water.

Tarmac & Pothole Repair We offer a range of permanent pothole repair & pothole filler materials such as Ultracrete Permanent Pothole Repair, instant tarmac including Ultracrete Instant Road Repair 6 & 10mm, cold joint sealants, line marker paints and anti-skid patch repair. Freezing weather will increase the set time and will cause the process to virtually stop, it can take many days for the joints to set fully hard. However EASYJoint will eventually set and the weather conditions will not have impaired its integrity in any way. EASYJoint brush-in patio grout , is a really simple, fast and DIY friendly way to fill the joints in paving slabs and flagstones. Market-leading EASYJoint is ideal for all types of paving such as natural stone, limestone, porcelain, sandstone, Yorkstone, Indian Stone, granite setts and concrete flags. Truly an all weather jointing compound: An all year round hard landscaping product to point your paving that can be used whatever the weather conditions are before, during or after application

Sponge Machines & Ancillaries We supply a range of indoor & outdoor sponge machines from Refina & Berta which are suitable for cleaning epoxy & cement grouts such as UltraScape Flowpoint from quarry tiles, external paving slabs, natural stone and granite setts. Our range of sponge machines protects the joints between paving slabs by avoiding washing away the cement, whilst the machine removes the need for individuals to wash away grout on their hands and knees. The great thing about Joint-IT products is that they are expert hardscape products. They offer the best possible combination of advanced technological formulations and environmentally friendly raw materials. All while promising a strong and effect solution for your paving needs.